Security | Switch | SNMP Menus
Security | Switch | SNMP Menus
This subsection discusses SNMP menus under the Security | Switch menu.
•
Security | Switch | SNMP | System
•
Security | Switch | SNMP | Trap
•
Security | Switch | SNMP | Communities
•
Security | Switch | SNMP | Users
•
Security | Switch | SNMP | Groups
•
Security | Switch | SNMP | Views
•
Security | Switch | SNMP | Access
Security | Switch | SNMP | System
Use this page to configure SNMP.
Item
Indicates the SNMP mode operation. Possible modes are:
Mode
•
•
Indicates the SNMP supported version. Possible versions are:
•
Version
•
•
Indicates the community read access string to permit access to SNMP agent. The
allowed string length is 0 to 255, and the allowed content is the ASCII characters
from 33 to 126.
Read
This field is applicable only when the SNMP version is SNMPv1 or SNMPv2c. If
Community
the SNMP version is SNMPv3, the community string is associated with SNMPv3
communities table. It provides more flexibility to configure security name than a
SNMPv1 or SNMPv2c community string. In addition to community string, a
particular range of source addresses can be used to restrict source subnet.
60 - Configuration Pages
on Page 60
on Page 61
on Page 65
on Page 66
on Page 67
on Page 68
on Page 69
Configuration | Security| Switch | SNMP | System
Enabled: Enable SNMP mode operation.
Disabled: Disable SNMP mode operation.
SNMP v1: Set SNMP supported version 1.
SNMP v2c: Set SNMP supported version 2c.
SNMP v3: Set SNMP supported version 3.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A