Table of Contents
Advertisement
Configure Mode Commands
frame-sizes
Description
Select the frame sizes that the enabled tests will loop through
Syntax
frame-sizes { [ 64 ] [ 128 ] [ 256 ] [ 512 ] [ 1024 ] [ 1280 ] [ 1518 ] [ 2000 ] [ 9600 ] }
Name
64
128
256
512
Parameters
1024
1280
1518
2000
9600
green-etherneteee
Description
Powering down of PHYs when there is no traffic.
Syntax
green-etherneteee
Parameter
None
green-etherneteee optimize-for-power
Set if EEE shall be optimized for least power
Description
consumption (else optimized for least traffic latency).
Syntax
green-etherneteee optimize-for-power
Parameter
None
green-etherneteee urgent-queues
Enables EEE urgent queue. An urgent queue means that latency is kept to a
Description
minimum for traffic goin to that queue. Note: EEE power savings will be reduced.
Syntax
green-etherneteee urgent-queues [ <range_list> ]
Name
Parameter
range_list
308 - Command Line Interface (CLI)
Description
Enable testing with 64-byte TST PDUs
Enable testing with 128-byte TST PDUs
Enable testing with 256-byte TST PDUs
Enable testing with 512-byte TST PDUs
Enable testing with 1024-byte TST PDUs
Enable testing with 1280-byte TST PDUs
Enable testing with 1518-byte TST PDUs
Enable testing with 2000-byte TST PDUs
Enable testing with 9600-byte TST PDUs
Description
EEE Interface.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
