Table of Contents
Advertisement
Security | Network | ACL | Ports
Item
Select whether forwarding is permitted (Permit) or denied (Deny). The default value is
Action
Permit.
Rate Limiter
Select which rate limiter to apply on this port. The allowed values are Disabled or the
ID
values 1 through 16. The default value is Disabled.
Port
Select which port frames are redirected on. The allowed values are Disabled or a specific
Redirect
port number and it cannot be set when action is permitted. The default value is Disabled.
Specify the mirror operation of this port. The allowed values are:
•
Enabled: Frames received on the port are mirrored.
Mirror
•
Disabled: Frames received on the port are not mirrored.
The default value is Disabled.
Specify the logging operation of this port. Notice that the logging message does not
include the 4 bytes CRC. The allowed values are:
•
Enabled: Frames received on the port are stored in the System Log.
Logging
•
Disabled: Frames received on the port are not logged.
The default value is Disabled.
Note: The logging feature only works when the packet length is less than 1518(without
Specify the port shut down operation of this port. The allowed values are:
•
Enabled: If a frame is received on the port, the port is disabled.
•
Disabled: Port shut down is disabled.
Shutdown
The default value is Disabled.
Note: The shutdown feature only works when the packet length is less than 1518
Specify the port state of this port. The allowed values are:
•
Enabled: To reopen ports by changing the volatile port configuration of the ACL user
module.
State
•
Disabled: To close ports by changing the volatile port configuration of the ACL user
module.
The default value is Enabled.
Counter
Counts the number of frames that match this ACE.
88 - Configuration Pages
Configuration | Security | Network | ACL | Ports (Continued)
VLAN tags), and the System Log memory size and logging rate are limited.
(without VLAN tags).
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
