Table of Contents
Advertisement
Private VLANs | Port Isolation
Item
Click the Add New Private VLAN button to add a new private VLAN ID. An empty row is
added to the table, and the private VLAN can be configured as needed. The allowed
range for a private VLAN ID is the same as the switch port number range. Any values
outside this range are not accepted, and a warning message appears. Click OK to
discard the incorrect entry, or click Cancel to return to the editing and make a correction.
The Private VLAN is enabled when you click Save.
The Delete button can be used to undo the addition of new Private VLANs.
Private VLANs | Port Isolation
This page is used for enabling or disabling port isolation on ports in a Private VLAN.
A port member of a VLAN can be isolated to other isolated ports on the same VLAN and Private VLAN.
Item
A check box is provided for each port of a private VLAN.
When checked, port isolation is enabled on that port.
Port
Members
When unchecked, port isolation is disabled on that port.
By default, port isolation is disabled on all ports.
•
•
Buttons
•
•
Configuration | VCL Menu
The following menus or pages are under the VCL menu.
•
VCL | MAC-Based VLAN
•
VCL | Protocol-Based VLAN Menu
•
VCL | IP Subnet-Based VLAN
148 - Configuration Pages
Configuration | Private VLANs | Membership (Continued)
Configuration | Private VLANs | Port Isolation
Check the Auto-refresh box to refresh the page automatically. Automatic refresh
occurs every 3 seconds.
Click the Refresh button to refresh the page immediately.
Click the Save button to save changes.
Click the Reset button to undo any changes made locally and revert to previously
saved values.
on Page 149
on Page 150
on Page 152
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Advertisement
Table of Contents
