Table of Contents
Advertisement
Item
Aggregation Group Configuration
Group ID
Port
Members
Aggregation | LACP
Use this page to inspect the current LACP port configuration and if necessary, make changes.
Item
Port
LACP
Enabled
Key
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Configuration | Aggregation | Static (Continued)
Indicates the group ID for the settings contained in the same row. Group
ID Normal indicates there is no aggregation. Only one group ID is valid
per port.
Each switch port is listed for each group ID. Select a radio button to
include a port in an aggregation, or clear the radio button to remove the
port from the aggregation. By default, no ports belong to any aggregation
group. Only full-duplex ports can join an aggregation and ports must be
in the same speed in each group.
The MP1204-XT port number.
Controls whether LACP is enabled on the MP1204-XT port. LACP forms
an aggregation when two or more ports are connected to the same partner.
The Key value incurred by the port, range 1-65535. The Auto setting sets
the key as appropriate by the physical link speed, 10Mb = 1, 100Mb = 2,
1Gb = 3. Using the Specific setting, a user-defined value can be entered.
Ports with the same Key value can participate in the same aggregation
group, while ports with different keys cannot.
Aggregation | LACP
Aggregation | LACP
Configuration Pages - 109
Advertisement
Table of Contents
