Table of Contents
Advertisement
Item
Indicates the community write access string to permit access to SNMP agent. The
allowed string length is 0 to 255, and the allowed content is the ASCII characters
from 33 to 126.
Write
This field is applicable only when SNMP version is SNMPv1 or SNMPv2c. If the
Community
SNMP version is SNMPv3, the community string is associated with SNMPv3
communities table. It provides more flexibility to configure security name than a
SNMPv1 or SNMPv2c community string. In addition to community string, a
particular range of source addresses can be used to restrict source subnet.
Indicates the SNMPv3 engine ID. The string must contain an even number (in
Engine ID
hexadecimal format) with number of digits between 10 and 64, but all-zeros and
all-'F's are not allowed. Change of the Engine ID clears all original local users.
Security | Switch | SNMP | Trap
Use this page to configure SNMP traps.
Object
Global Settings
Indicates the trap mode operation. Possible modes are:
Mode
•
Enabled: Enable SNMP trap mode operation.
•
Disabled: Disable SNMP trap mode operation.
Trap Destination Configurations
Name
Indicates the trap Configuration's name. Indicates the trap destination's name.
Indicates the trap destination mode operation. Possible modes are:
Enable
•
Enabled: Enable SNMP trap mode operation.
•
Disabled: Disable SNMP trap mode operation.
Indicates the SNMP trap supported version. Possible versions are:
•
SNMPv1: Set the SNMP trap to the supported version 1.
Version
•
SNMPv2c: Set the SNMP trap to the supported version 2c.
•
SNMPv3: Set the SNMP trap to the supported version 3.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Configuration | Security| Switch | SNMP | System (Continued)
Configuration | Security| Switch | SNMP | Trap
Security | Switch | SNMP | Trap
Configuration Pages - 61
Advertisement
Table of Contents
