Table of Contents
Advertisement
Configuration | DHCP | Menus
DHCP menus include:
•
DHCP | Server | Mode
•
DHCP | Server | Excluded IP
•
DHCP | Server | Pool
•
DHCP | Snooping
•
DHCP | Relay
on Page 53
DHCP | Server | Mode
Use this page to configure global mode and VLAN mode to enable or disable the DHCP server per system and
per VLAN.
Item
Global Mode
Configure the operation mode per system. Possible modes are:
Mode
•
Enabled: Enable DHCP server per system
•
Disabled: Disable DHCP server per system.
VLAN Mode
Indicates the VLAN range in which the DHCP server is enabled or disabled. The first
VLAN ID must be smaller than or equal to the second VLAN ID. But, if the VLAN range
contains only 1 VLAN ID, then you can enter it into either one of the first and second
VLAN ID or both.
If you want to disable an existing VLAN range, then you can follow the steps.
VLAN
1. Press the Add VLAN Range button to add a new VLAN range.
Range
2. Enter the VLAN range that you want to disable.
3. Choose the Mode option to be Disabled.
4. Press the Save button to apply the change.
Note that the disabled VLAN range is removed from the DHCP Server Mode Configuration
page.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
on Page 49
on Page 50
on Page 51
on Page 52
Configuration | DHCP | Server | Mode
Configuration | DHCP | Menus
Configuration Pages - 49
Advertisement
Table of Contents
