Snmp Configure Commands; Snmp-Server; Snmp-Server Access; Snmp-Server Community V2C - Comtrol RocketLinx MP1204-XT User Manual

SNMP Configure Commands

This subsection contains SNMP Configure commands.

snmp-server

Description Enable SNMP server
Syntax snmp-server
Parameter None

snmp-server access

Description snmp-server access configuration
snmp-server access < group name > model { v1 | v2c | v3 | any } level {
Syntax
auth | noauth | priv } [ read <word255> ] [ write <word255> ]
Name
< group name >
< v1 | v2c | v3 | any >
< level >
Parameters { auth | noauth | priv }
read
<word255>

snmp-server community v2c

Description Set the SNMP v2c community
Syntax snmp-server community v2c <word127> [ ro | rw ]
Name
< word127 >
Parameters
< ro >
<rw>
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Description
32 words
V1~v3 security model
security level
authNoPriv Security Level
noAuthNoPriv Security Level
authPriv Security Level
specify a read view for the group
read view name
Description
Community word
Read only
Read write
SNMP Configure Commands
Command Line Interface (CLI) - 343