Table of Contents
Advertisement
Security | AAA | TACACS+
Use this page to configure TACACS+.
Item
Global Configuration
Timeout is the number of seconds, in the range 1 to 1000, to wait for a reply from a
Timeout
TACACS+ server before it is considered to be dead.
Deadtime, which can be set to a number between 0 to 1440 minutes, is the period
during which the MP1204-XT does not send new requests to a server that has failed
to respond to a previous request. This stops the MP1204-XT from continually trying
Deadtime
to contact a server that it has already determined as dead.
Setting the Deadtime to a value greater than 0 (zero) enables this feature, but only if
more than one server has been configured.
The secret key - up to 63 characters long - shared between the TACACS+ server and
Key
the switch.
Server Configuration
To delete a TACACS+ server entry, check this box. The entry is deleted during the
Delete
next Save.
Hostname
The IP address or hostname of the TACACS+ server.
Port
The TCP port to use on the TACACS+ server for authentication.
This optional setting overrides the global timeout value. Leaving it blank uses the
Timeout
global timeout value.
Key
This optional setting overrides the global key. Leaving it blank uses the global key.
Click to add a new TACACS+ server, up to five servers are supported.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Configuration | Security | AAA | TACACS+
Security | AAA | TACACS+
Configuration Pages - 107
Advertisement
Table of Contents
