Table of Contents
Advertisement
Configuration | Security | AAA Menus
The following pages are under the AAA sub-menu:
•
Security | AAA | RADIUS
•
Security | AAA | TACACS+
Security | AAA | RADIUS
Use this page to configure your RADIUS server.
Item
Global Configuration
Timeout
Retransmit
Deadtime
Key
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
on Page 105
on Page 107
Configuration | Security | AAA | RADIUS
Timeout is the number of seconds, in the range 1 to 1000, to wait for a reply from a
RADIUS server before retransmitting the request.
Retransmit is the number of times, in the range 1 to 1000, a RADIUS request is
retransmitted to a server that is not responding. If the server has not responded
after the last retransmit it is considered to be dead.
Deadtime, which can be set to a number between 0 to 1440 minutes, is the period
during which the MP1204-XT does not send new requests to a server that has
failed to respond to a previous request. This stops the MP1204-XT from continually
trying to contact a server that it has already determined as dead.
Setting the Deadtime to a value greater than 0 (zero) enables this feature, but only
if more than one server has been configured.
The secret key, up to 63 characters long is shared between the RADIUS server and
the MP1204-XT.
Configuration | Security | AAA Menus
Configuration Pages - 105
Advertisement
Table of Contents
