Table of Contents
Advertisement
Configuration | MVR
This page provides MVR related configurations.
The MVR feature enables multicast traffic forwarding on the Multicast VLANs.
In a multicast television application, a PC or a network television or a set-top box can receive the multicast
stream. Multiple set-top boxes or PCs can be connected to one subscriber port, which is a switch port
configured as an MVR receiver port. When a subscriber selects a channel, the set-top box or PC sends an
IGMP/MLD report message to Switch A to join the appropriate multicast group address. Uplink ports that
send and receive multicast data to and from the multicast VLAN are called MVR source ports.
You can create a maximum of four MVR VLANs with corresponding channel profile for each Multicast VLAN.
The channel profile is defined by the IPMC Profile which provides the filtering conditions.
Item
Enable/Disable the Global MVR.
The Unregistered Flooding control depends on the current configuration in IGMP/MLD
MVR Mode
Snooping.
It is suggested to enable Unregistered Flooding control when the MVR group table is
full.
Delete
Check to delete the entry. The designated entry is deleted during the next save.
RocketLinx MP1204-XT User Guide: 2000644 Rev. A
Configuration | MVR
Configuration | MVR
Configuration Pages - 121
Advertisement
Table of Contents
