Table of Contents
Advertisement
VLAN Configuration
Use this page to assign the Manageme nt VLAN, create the static VLAN, and assign the Egress rule for the member ports of the
VLAN.
VLAN Configuration
Management VLAN
ID
Static VLAN
VLAN Configuration
The RocketLinx ES7528 supports management VLAN. The management VLAN ID is the VLAN
ID of the CPU interface so that only member ports of the management VLAN can ping and access
the switch. The default management VLAN ID is 1.
Click Apply after you enter the VLAN ID.
You can assign a VLAN ID and VLAN Name for new VLAN.
•
VLAN ID: This is used by the switch to identify different VLANs. A valid VLAN ID is
between 1 and 4,094, 1 is the default VLAN.
•
VLAN Name: This is a reference for the network administrator to identify different VLANs.
The VLAN name may up to 12 characters in length. If you do not provide a VLAN name, the
system automatically assigns a VLAN name for this VLAN. The rule is VLAN (VLAN ID).
Click Add to create a new VLAN. The new VLAN displays in the Static VLAN Configuration
table. After creating the VLAN, the status of the VLAN remains Unused, until you add ports to
the VLAN.
Note: Before changing the management VLAN ID by web or Telnet, remember that the port
attached by the administrator should be the member port of the management VLAN;
otherwise the administrator cannot access the switch through the network. The
RocketLinx ES7528 supports a maximum of 64 VLANs.
RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A - 81
Description
VLAN Configuration
Advertisement
Table of Contents
