Using a Web Browser to Set Security Features
The follow procedures are discussed below:
•
Changing Security Configuration
•
Changing Keys and Certificates
Changing Security Configuration
Use the following steps to change security settings in the DeviceMaster.
1. Enter the IP address of the DeviceMaster in the Address field of your web browser and press the Enter
key.
2. Click Network | Security.
3. Click the appropriate check boxes to enable or disable security for your environment.
Refer to the help system or
information.
4. After making changes, click Save.
DeviceMaster Installation and Configuration Guide: 2000594 Rev. F
on Page 86
Configure/Enable Security Features Overview
Using a Web Browser to Set Security Features
on Page 79 for detailed
DeviceMaster Security - 85