N2852A AutoProbe II to AutoProbe III Interface Adapter
This adapter allows you to connect the N2800A / N2801A / N2802A / N2803A InfiniiMax III
probe to a Keysight UXR-Series (40GHz or higher) Infiniium oscilloscope that has the
AutoProbe III interface.
To know more about this adapter, visit
download the adapter's user guide available in the Document Library tab.
InfiniiMax III Series Probes User's Guide
Care should be taken while handling the N2852A adapter's RF
CAUTION
cable. Avoid bending this cable backwards or kinking the cable in
order to ensure measurements accuracy.
Using InfiniiMax III Series Probes
http://www.keysight.com/find/N2852A
1
and then
13