Installation Procedure - Mitsubishi Electric GT1695M-XTBD User Manual

*1: The flash PC card of the GOT-A900 series
In the GT16
Use the CF card which is described in the above.
*2: To install a CF card to a multimedia unit, formatting in FAT32 is recommended.
*3: Some models with the operations checked by our company are usable.
For the operation-checked models, refer to "List of valid devices applicable for GOT1000 series" (T10-0039)
separately available.
The Technical News above is available as a reference at the Information site for Mitsubishi industrial automation
products.
(MELFANSweb website: http://wwwf2.mitsubishielectric.co.jp/english/index.html)
*4: For the white frame (other than the display section), use the model.
*5: Note that this does not guarantee all users' operation environment.
In addition, the GOT may not be available for use in the environment where oil or chemicals are splashed over for
a long period or where oil mist is filled.
7.3.2

Installation procedure

This section describes how to install a option on a GOT.
1 CF card
(1) CF card inserting/removing method with CF card interface of GOT
Install/remove the CF card with the power supply of GOT is OFF or CF card access switch is OFF.
(a) Installing
1 Turn the CF card access switch of the GOT off.
2 Open the cover of the CF card interface.
Insert and install the CF card into the CF card interface with its front side outside.
, the flash PC card for GOT-A900 series cannot be used.
OFF
ACCESS
ON
CF Card
top face
7.3 Option
7.3.2 Installation procedure
1
2
3
4
5
6
7
8
7
- 34