Table of Contents
Advertisement
Logging in from the Web interface
By default, HTTP and HTTPS are enabled and the following login information is defined for your
login:
•
Username—admin.
•
Password—h3capadmin.
Cloud mode
The configuration terminal must be enabled with DHCP.
Some Intel wireless adapters do not support 802.11ax. For clients to detect Wi-Fi 6 networks,
upgrade the driver for the wireless adapter to the most recent version. For more information, see
the official statement of
To log in to the AP through a wireless connection:
1.
Enable WLAN on the configuration terminal and access WLAN H3C_xxxxxx, where xxxxxx is
the last six bits of the AP's MAC address.
2.
Visit http://wlan.h3c.com from a browser, and then press Enter.
Visit http://myap.h3c.com from a browser for a configuration terminal in a version earlier than
2448P10.
3.
Enter the default username and password. For security purposes, change the password as
prompted after you access the Web interface, and then click OK.
Anchor ACmode
When the AP operates in anchor AC mode, only wired connections are available.
Open a Web browser and visit 192.168.0.50 to log in to the device. If the device IP address has
been changed, contact your network administrator obtain the most recent configuration.
Intel.
3
Advertisement
Table of Contents
