Configuring Avaya Cu360 For Port-Based Network Authentication - Avaya CU360 Installing And Administering

Initial administration
• PIN: Users must enter a PIN to be allowed to install applications.
• Password: Users must enter a password to be allowed to install applications.
Configuring Avaya CU360 for port-based network
authentication
About this task
Configure the network security authentication for IEEE 802.1X-compliance over the Ethernet.
Before you begin
Ensure that your network components support IEEE 802.1Q.
Important:
If the components do not support IEEE 802.1Q, and if you enable this feature, Avaya CU360
will not get an IP address.
Procedure
1. Click
on the navigation bar.
Avaya CU360 displays the desktop.
2. Click
.
3. Click Settings.
Avaya CU360 displays the Settings window.
4. Click More.
Avaya CU360 displays the Wireless & networks window.
5. Click Ethernet.
Avaya CU360 displays the Ethernet window.
6. Click 802.1X (PNAC).
Avaya CU360 displays the Ethernet 802.1X (PNAC) window.
7. Configure the following fields:
• Enable: Select Yes.
• Authentication: Select MD5.
• Username: Type the username for 802.1X-compliant authentication.
• Password: Type the password for 802.1X-compliant authentication.
8. Click Save.
July 2020 Installing and Administering Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
60