Common Remote Control Shortcuts - Avaya Scopia XT Series Release Notes

Common Remote Control Shortcuts






Figure 75: Use * Key to Cancel a Meeting ID



Release Notes for Avaya Scopia® XT Series
To check the call status and diagnostics during a call, press the Stats button in the Call
Control Panel. To view statistics for each participant in a meeting, press left/right arrows to
select the previous and next participant.
To access the layouts menu during a call, press and hold the 'layouts' key.
Access the Call Control Panel by pressing 'ok/menu' on the Remote Control, or double
click with the mouse. The Panel automatically disappears after a few seconds. To
manually hide it, press the 'back/undo' key.
Press and hold a single digit (0-9) on the Remote Control Unit to recall an assigned
position of the local or far PTZ camera.
When entering the meeting ID for a videoconference hosted by an Elite MCU, use the *
character to delete an incorrect digit (as indicated on the MCU prompt). Do not use the 'C'
or 'del' keys on the Remote Control Unit.
To restore the Codec Unit to automatic monitor configuration, press the 'layouts' key, and
then press 0 on the Remote Control Unit. Use this shortcut only when no call is active.
To change the refresh frequency used for the monitors, press the 'layouts' key on the
Remote Control Unit, then press 5 to set it to 50 Hz or 6 to set it to 60 Hz. Use this
shortcut only when no call is active
Press and hold the 'call' key to toggle Do Not Disturb
Common Remote Control Shortcuts | 74