Preinstall Favorite Apps And Custom Wipe; Prerequisites - Avaya CU360 Release Notes

© 2021 Avaya Inc. All rights reserved

Preinstall Favorite Apps and Custom Wipe

This release allows a CU360 to be used by guests in hospitality industry and medical facilities
(hotels, lodgings, hospital rooms...), offering them a list of pre-installed applications, managed by
the facility staff, and ensuring that any data inserted by room guests during their stay will be
erased when the guests leave the room (checkout, dismiss).
The facility's guests can enjoy a preconfigured CU360 with some favorite applications already
installed, for video-communication, for entrainment, for work.
When the guest checkouts, the CU360 can be easily restored remotely (by the facility staff) to the
same conditions in which it was before the guest used it for the first time.

Prerequisites

Once the device has been physically placed in the final location (typically a facility room), and
connected to an HDMI monitor and to power, it must be configured to get an IP Address
(connected to ethernet or via Wi-Fi).
Once the device has an assigned IP Address, most of the configurations can be done by the
facility staff remotely, through the web interface of the device.
To login into the Codec Unit via a web browser, browse to https://<Codec IP Address>
The default credentials are:
•
Below pre-requisites will be carried by the facility staff, only once per CU360 device, locally or
remotely.
•
•
•
Release Notes for Avaya Collaboration Unit CU360
User: Admin
Password: 1234
Important
•
It is strongly suggested to note the IP address of the device together with a
meaningful name assigned to the device to recognize it later (i.e. CU_Room_xyz).
•
It is strongly recommended to change the default Web Access Credentials.
CU360 must be configured once with facility's preferences related to the location of the
device (typically ethernet connection or Wi-Fi configuration, time-zone, language,
sip/h.323 calling configuration if needed, and so on).
This is the standard Quick Setup initial procedure available for any CU out-of-the
o
box.
CU360 must have Google Play Store installed to allow the client to download additional
preferred applications.
This can be done by following the "AppsProvider" procedure available through the
o
local UI or via Web. A single Google account can be used to install the Google
Play Store in all the facility CU devices. The guest will then configure the Google
Play Store with his own account at first usage.
CU360 must have some applications pre-installed that the facility wants to offer to their
guests (i.e. Skype, Zoom or others). The list of those "Favorite Apps" will be called
whitelist in these instructions.
This is be possible through the Web Interface of the device via a new ad-hoc
o
menu. The procedure is needed once and should be repeated only to upgrade the
whitelist with new apps. See "How to Preinstall Favorite Apps" section.
What's New 62