Configuring Tls In Avaya Cu360 - Avaya CU360 Installing And Administering

Name
Use Server 1
Use Server 2 (Optional)
Use Server 3 (Optional)
Server 1 DNS Name
Server 2 DNS Name
(Optional)
Server 3 DNS Name
(Optional)
Server Model

Configuring TLS in Avaya CU360

About this task
With TLS, network devices can communicate securely by using certificates. TLS provides device
authentication and communications encryption.
This configuration is available only if your administrator enabled the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
CU360 displays the Advanced window.
3. Click Protocols > SIP > Advanced.
4. Configure the following fields:
• Transport Outbound Call
• Use TLS
• Verify Certificate
• Certificate Hostname Validation
July 2020
Description
The SIP servers to which Avaya CU360 registers for calls.
For redundant SIP deployments, you can enter information for maximum
three SIP servers.
• Avaya CU360 uses the Server 1 as the default SIP server.
• If the Server 1 fails, Avaya CU360 uses the Server 2 and Server 3.
The DNS name or IP address of each SIP server.
The model of the SIP server for the best interaction.
Installing and Administering Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
Configuring TLS in Avaya CU360
107