Enter/Exit Programming Mode
DataBar Expanded Length Control
This feature specifies either variable-length or fixed-length decoding for DataBar Expanded.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below. You'll need to cover any unused barcodes on
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
04BD01(CR)
DataBar Expanded Length Control = Fixed Length
290
this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
Mode bar code.
04BD00(CR)
DataBar Expanded Length Control = Variable Length
Magellan™ 9800i Scanner