Programming Mode Indications - Datalogic Magellan CSS4400 Quick Reference Manual

Programming Mode Indications

Programming Mode Indications
The following indications ONLY occur when the CSS is in Program-
ming Mode
.
Indicator
Label Program-
ming Mode Entry
Label Program-
ming Mode Rejec-
tion of Label
Label Program-
ming Mode Accep-
tance of Partial
Label
Label Program-
ming Mode Accep-
tance of
Programming
Label Program-
ming Mode Can-
cel Item Entry
16
Description
A valid programming
label has been
scanned.
A label has been
rejected.
In cases where multi-
ple labels must be
scanned to program
one feature, this indi-
cation acknowledges
each portion as it is
successfully scanned.
Configuration
option(s) have been
successfully pro-
grammed via labels
and the reader has
exited Programming
Mode.
Cancel label has been
scanned.
LED
LED blinks con-
tinuously
N/A
N/A
N/A
N/A
Customer Service Scanner
Beeper
The CSS sounds
four low fre-
quency beeps.
The CSS sounds
three times at
lowest frequency
and current vol-
ume.
The CSS sounds
one short beep at
highest fre-
quency and cur-
rent volume.
The CSS sounds
one high fre-
quency beep and
4 low frequency
beeps followed
by reset beeps.
The CSS sounds
two times at low
frequency and
current volume.