Table of Contents
Advertisement
Gryphon Configuration
Gryphon Configuration
Most of the settings for the GryphonPRE handheld device are the same as those for the standard
Gryphon reader. Use the manuals for the Gryphon 4100 family or Datalogic Aladdin to change
additional configuration settings not found in this manual. They are available for download
from the Datalogic website.
This section shows additional settings for PreScan mode.
•
•
•
•
•
Restore Factory Default
Scan the programming bar code below to return the handheld to a known state before applying
custom configuration settings:
The default setting is Handheld Mode. See
page 19 for more information.
PreScan (Multi Lane or MUL Mode)
To use the Gryphon scanner for PreScan, the scanner should be placed in Multi Lane mode.
When in Multi Lane mode, any base in radio range can communicate with the handheld
scanners.
Set to PreScan Mode
To set the Gryphon for PreScan mode, scan the following label:
18
Restore Factory Default
on page 18
PreScan (Multi Lane or MUL Mode)
Keypad Enable/Disable
on page 20
Set Indicators
on page 20
Basket Operations
on page 22
Gryphon PreScan devices (cradle/base station and reader/handheld) will
not work with other Gryphon devices (GM 4xxx/GD 4xxx family) using the
STAR™ radio module.
on page 18
Restore Default
$+$*
Set to PreScan Mode
on page 18 or
Enter PreScan Mode
PreScan™ Queue-Busting System
Handheld Mode
on
Advertisement
Table of Contents
