Turning Analog Output On/Off; Printing; Printers; Equipment Required For Printing - HP E4915A User Manual

3. Use keys on the ENTRY block to enter the rate of change in output
voltage with change in frequency. (When you specify 1 dFdV, the
output voltage changes by 1 V as the frequency changes by 1 Hz.)
Turning Analog Output ON/OFF
1. Sequentially press [(blue)) and (- (System)]. Use or to
display AnalogOut: OFF .
2- Press AnalogOut:OFF to toggle it Off..
Printing
The HP E4915A/E4916A allows measurement results to be printed
after each measurement. Note that an optional HP-IB Centronics
converter is required for printing.
Printers
PCL-compatible printers with Centronics interface can be used.
Equipment Required for Printing
The following is required for printing measurement results:
■ PCL-compatible printer with Centronics interface
■ Printer cable
■ HP-IB Centronics converter (ITEL-45CHVU)
■ HP-IB cable
Connecting Printer
Be sure to turn OFF the HP E4915A/E4916A, printer, and HP-IB
Centronics converter before connecting the printer to the
HP E4915A/E491.6A.
1. Check that the power for the printer and HP E4915A/E4916A is
OFF.
2. Connect the printer and HP-IB Centronics converter with the
printer cable.
3. Next, connect the HP-IB Centronics converter and
HP E4915A/E4916A with the HP-IB cable.
4. When you finish making connections, turn ON the printer,
HP E4915A/E4916A, and converter.
Applications 5-11