Installing Your Analyzer
STEP 4. Configure the Analyzer
To Configure the Analyzer with Printers or Plotters
1. Connect your printer or plotter to the corresponding interface.
2. If you are using the parallel interface, press
choice of
COPY
or
1-12
GPIO
appears.
and toggle
PARALLEL
Local
If you choose
COPY
, the parallel port is
dedicated for normal copy device use
(printers or plotters).
If you choose
GPIO
, the parallel port is
dedicated for general purpose I/O. The
analyzer controls the data input or output
through the sequencing capability of the
analyzer.
until your
Chapter 1