Honda ACCORD HYBRID 2005 Service Manual page 2008

Audio System
S y m p t o m T r o u b l e s h o o t i n g ( c o n t ' d )
Special Tools Required
• Radio test harness breakout box 07AAZ-SDAA100
• Test harness (Stanley) 070AZ-SDAA200
Disc does not eject (without navigation)
NOTE: Inspect the quality of the Discs, and make sure
there are no adhesive labels applied to t h e m .
1. Check to see if the CD disc is ejects correctly by
pushing the EJECT button.
Is It normal?
YES—Operation is n o r m a l . •
N O — G o t o step 2.
2. Check to see if the disc is ejects w i t h some binding
or does not ejected at all.
Does the disc bind when it ejects?
YES — G o t o step 3.
N O — G o to step 4.
3. Replace the disc w i t h a different one and recheck.
Does the problem continue?
YES —Replace audio u n i t . B
NO—Faulty CD d i s c . B
4. Remove the audio unit (see page 23-71).
5. Connect the test harness (070AZ-SDAA200) to the
radio test harness breakout box (07AAZ-SDAA100).
6. Connect the test harness connectors to the printed
circuit board connector of the audio unit.
7. Connect the o h m meter to the breakout box
(07AAZ-SDAA200) EJECT and GND terminals.
8. Push the EJECT button and check for continuity
between the EJECT and GND t e r m i n a l s .
Is there continuity?
Y E S — G o t o step 9.
NO—Replace the audio-HVAC display panel
(see page 23-71). •
9. Check the connections between the audio-HVAC
display panel and the audio unit.
Are the connections OK?
YES—Replace the audio u n i t . B
NO—Reinstall the audio-HVAC display panel onto
the audio unit, and check the p r o b l e m . B
23-42