Honda ACCORD HYBRID 2005 Service Manual page 2117

10. Remove the shoulder anchor adjuster (A).
8 x 1.25 m m
22 N-m
(2.2 k g f m , 16 Ibf-ft)
11. Install the seat belt in the reverse order of r e m o v a l ,
and note these items:
• Apply liquid thread lock to the anchor bolts
before reinstallation.
• Check that the retractor locking mechanism
functions (see page 24-9).
• Assemble the washers, collars, and bushings on
the upper and lower anchor bolts as s h o w n .
• If the seat belt tensioner has been deployed,
replace the front seat belt protector.
• Before installing the anchor bolts, make sure
there are no twists or kinks in the front seat belt.
• Make sure the seat belt tensioner connector is
plugged in properly.
• Reconnect the negative cable to the battery.
• If the IMA battery level gauge (BAT) displays no
segments, start the engine, and hold it between
3,500 r p m and 4,000 rpm w i t h o u t load (in Park or
Neutral) until the BAT displays at least three
segments.
• Enter the anti-theft codes for the radio and the
navigation system, then enter the customer's
audio presets.
• Set the clock.
U p p e r a n c h o r b o l t i n s t a l l a t i o n
COLLAR UPPER ANCHOR UPPER ANCHOR
BOLT
TOOTHED
LOCK W A S H E R
BUSHING
L o w e r a n c h o r b o l t i n s t a l l a t i o n
SPRING W A S H E R
COLLAR
COLLAR
T O O T H E D
LOCK W A S H E R
B U S H I N G
L O W E R ANCHOR
(cont'd)
24-5