A c t i v e N o i s e C o n t r o l M i c r o p h o n e R e m o v a l / I n s t a l l a t i o n
Front
1. Remove the headliner (see page 20-56).
2. Disconnect the connector (A), then remove the
screws and the active noise control microphone (B).
3. Install in the reverse order of removal.
Rear
1. Remove the rear shelf (see page 20-51).
2. Disconnect the connector (A), then remove the
screws and the active noise control microphone (B).
3. Install in the reverse order of r e m o v a l .
23-77