A u d i o - H V A C S u b d i s p l a y / C l o c k
R e p l a c e m e n t
With Navigation
1. Remove the upper panel (see page 20-68).
2. Remove the t w o m o u n t i n g screws.
3. Disconnect the 10P connector (A) f r o m the audio-
HVAC subdisplay/clock (B).
A
4. Install in the reverse order of removal.
S p e a k e r R e p l a c e m e n t
Front Speaker
1. Remove the door panel (see page 20-7).
NOTICE
If you pull the speaker out too far f r o m the
door, you will damage the lower clips (C).
2. Pull the top of the speaker (A) straight out, just
enough to release the upper clips. Then lift the
speaker straight up to release the lower clips (C).
3. Disconnect the 2P connector (B), and remove the
speaker.
4. Install in the reverse order of removal.
(cont'd)
23-73