Honda ACCORD HYBRID 2005 Service Manual page 1678

Climate Control
A / C S y s t e m T e s t ( c o n t ' d )
8. To complete the charts:
• Mark the delivery temperature along the vertical line.
• Mark the intake temperature (ambient air temperature) along the b o t t o m line.
• Draw a line straight up f r o m the air temperature to the humidity.
• Mark a point 10 % above and 10 % below the h u m i d i t y level.
• From each p o i n t d r a w a horizontal line across the delivery temperature.
• The delivery temperature should fall between the t w o lines.
• Complete the low-side pressure test and high-side pressure test in the same w a y .
• A n y measurements outside the line may indicate the need for further inspection.
Example Intake temperature (dry):
Intake temperature (wet):
Delivery temperature:
Intake pressure:
Delivery pressure:
Results: W i t h i n normal range
kPa
(kgf/cm 2 )
[psi]
3,000 -
(30)
[435]
86 °F (30 °C) Humidity level 70 %
77.9 °F (25.5 °C)
62 °F (16.5 °C)
272 kPa (2.8 kgf/cm 2 ) (39 psi)
1,818 kPa (18.5 kgf/cm 2 ) (263 psi)
2,000 -
(20)
[290]
1,000 —
(10)
[145]
DELIVERY
P R E S S U R E
HUMIDITY
L E V E L
D E L I V E R Y
T E M P E R A T U R E
INTAKE T E M P E R A T U R E
21-108