Honda ACCORD HYBRID 2005 Service Manual page 1516

Seats
F r o n t S e a t L u m b a r S u p p o r t R e p l a c e m e n t ( c o n t ' d )
6. Disconnect the lumbar support cable (A) f r o m the
l u m b a r support actuator (B).
8. Install the lumbar support in the reverse order of
removal, and note these items:
• Make sure the cable is connected securely.
• To prevent wrinkles w h e n installing a seat-back
cover, make sure the material is stretched evenly
over the pad before securing the hook strips.
• Replace the back panel clips w i t h new ones.
7. Remove the lumbar support (A).
- 1 Release both lower springs (B) f r o m inside the
seat-back.
- 2 Release the lumbar support f r o m both upper
springs (C).
C
20-88