Honda ACCORD HYBRID 2005 Service Manual page 2121

Inspection
SRS components are located in this area. Review the
SRS c o m p o n e n t locations (see page 24-11) and the
precautions and procedures (see page 24-13) before
p e r f o r m i n g repairs or service.
Retractor
1. Before installing the retractor, check that the seat
belt can be pulled out freely.
2. Make sure that the seat belt does not lock w h e n the
retractor (A) is leaned slowly up to 15 ° f r o m the
m o u n t e d position. The seat belt should lock w h e n
the retractor is leaned over 40 °. Do not attempt to
disassemble the retractor.
Front
Left side: 10.5
Rear center
Inside Forward
3. Replace the seat belt w i t h a new assembly if there
is any abnormality. Do not disassemble any part of
the seat belt for any reason.
(cont'd)
24-9