Honda ACCORD HYBRID 2005 Service Manual page 2019

12. Check for continuity between the active noise
control front or rear microphone 4P or 5P harness
connector No. 3 (front) or No. 2 (rear) terminal and
body ground.
ACTIVE NOISE C O N T R O L FRONT MICROPHONE
H A R N E S S 5P C O N N E C T O R
Terminal side of male t e r m i n a l s
ACTIVE NOISE C O N T R O L REAR MICROPHONE
H A R N E S S 4P C O N N E C T O R
Wire side of female t e r m i n a l s
Is there continuity?
Y E S — G o t o step 13.
NO—Repair an open in the w i r e between the active
noise control front or rear microphone 4P or 5P
connector and body ground (G601).H
13. Turn the ignition switch OFF.
p
ORr
c p
1 2 4
/
ORr
1 2 3 4
/
BLK
ORr J Y E L
14. Check for continuity between body g r o u n d and the
active noise control front or rear m i c r o p h o n e 4P or
5P harness connector No. 1 and No. 2 (front) or
No. 3 and No. 4 (rear) terminals individually.
ACTIVE NOISE CONTROL FRONT MICROPHONE
HARNESS 5P CONNECTOR
(Q)(P)
Terminal side of male t e r m i n a l s
ACTIVE NOISE C O N T R O L REAR MICROPHONE
H A R N E S S 4P C O N N E C T O R
WHT
W i r e side of female t e r m i n a l s
Is there continuity?
YES—Repair short in the w i r e between body
g r o u n d and the active noise control front or rear
microphone 4P or 5P c o n n e c t o r . B
NO—Go to step 15.
(cont'd)
23-53