Honda ACCORD HYBRID 2005 Service Manual page 2021

22. Check continuity between the active noise control
unit 16P connector No. 11 terminal and the active
noise control front m i c r o p h o n e 5P harness
connector No. 2 t e r m i n a l .
ACTIVE NOISE C O N T R O L UNIT 16P C O N N E C T O R
Wire side of female t e r m i n a l s
1—
— r
1 2 3 4 5 7 8
10 12 14 15 16
Y E L
Y E L
ACTIVE NOISE C O N T R O L FRONT MICROPHONE
H A R N E S S 5P C O N N E C T O R
T e r m i n a l side of male t e r m i n a l s
Is there continuity?
Y E S — G o t o step 23.
NO—Repair an open in the w i r e between the active
noise control unit 16P connector No. 11 terminal
and the active noise control front microphone 5P
connector No. 2 t e r m i n a l . •
23. Disconnect the active noise control rear
m i c r o p h o n e 4P connector.
24. Check continuity between the active noise control
unit 16P connector No. 4 terminal and the active
noise control rear microphone 4P harness
connector No. 4 t e r m i n a l .
ACTIVE NOISE C O N T R O L UNIT 16P C O N N E C T O R
Wire side of female t e r m i n a l s
WHT
10 11 12 14 15 16
WHT
ACTIVE NOISE C O N T R O L REAR MICROPHONE
H A R N E S S 4P C O N N E C T O R
W i r e side of female t e r m i n a l s
Is there continuity?
YES—Go to step 25.
NO—Repair an open in the w i r e between the active
noise control unit 16P connector No. 4 terminal and
the active noise control rear m i c r o p h o n e 4P
connector No. 4 terminal. •
(cont'd)
23-55