Honda ACCORD HYBRID 2005 Service Manual page 2261

Disposal of Damaged Components
1. If installed in a vehicle, f o l l o w the removal
procedure for the driver's airbag (see page 24-139),
front passenger's airbag (see page 24-140), side
airbag (see page 24-141), side curtain airbag
(see page 24-142), and seat belt tensioner (see page
24-4).
2. In all cases, make a short circuit by cutting,
stripping, and t w i s t i n g together the t w o inflator
wires.
NOTE: The driver's and front passenger's airbags
have dual inflators. The like color wires go to the
individual inflators.
3. Package the c o m p o n e n t in exactly the same
packaging that the new replacement part came in.
4. Mark the outside of the box " D A M A G E D AIRBAG
NOT DEPLOYED," " D A M A G E D SIDE AIRBAG NOT
DEPLOYED," " D A M A G E D SIDE CURTAIN AIRBAG
NOT DEPLOYED," " D A M A G E D SEAT BELT
TENSIONER NOT DEPLOYED" so it does not get
confused w i t h y o u r parts stock.
5. Contact your Honda District Service Manager for
h o w and w h e r e to return it for disposal.
Deployment Tool Check
1. Connect the y e l l o w clips to both switch protector
handles on the t o o l ; connect the tool to a battery.
2. Push the operation switch; green light means the
tool is OK; a red light means the tool is faulty.
3. Disconnect the y e l l o w clips f r o m the battery.
24-149