SRS
S i d e C u r t a i n A i r b a g R e p l a c e m e n t ( c o n t ' d )
Installation
NOTE:
• Installation of the side curtain airbag must be performed according to the precautions/procedures described at the
beginning of the SRS (see page 24-13).
• If the airbag is frayed, or has only other visible damage, replace it. Do not attempt to repair an airbag.
• W h e n you install the airbag, make sure it is not t w i s t e d , and not caught between the inflator brackets by the bracket
bolts.
• Make sure that the side curtain airbag inflator retainer is installed properly, otherwise the airbag could accidentally
deploy and cause damage or injuries.
1. Place the new side curtain airbag assembly on the side of the roof. Tighten the side curtain airbag m o u n t i n g
bolts (A).
A
6 N-m
(0.6 kgfm, 4.3 Ibf-ft)
Left side s h o w n ; right side is similar.
24-144