Honda ACCORD HYBRID 2005 Service Manual page 2007

Special Tools Required
• Radio test harness breakout box 07AAZ-SDAA100
• Test harness A & B (Alpine) 070AZ-SDAA100
Disc does not eject (with navigation)
NOTE: Inspect the quality of the Discs, and make sure
there are no adhesive labels applied to t h e m .
1. Check to see if the CD is ejects correctly by pushing
the EJECT button.
Is it normal?
YES—Operation is normal. •
N O — G o t o step 2.
2. Check to see if the disc is ejects w i t h some binding
or does not ejected at all.
Does the disc bind when it ejects?
YES—Go to step 3.
NO—Go to step 4.
3. Replace the disc w i t h a different one and recheck.
Does the problem continue?
YES—Faulty audio u n i t . B
NO—Faulty disc. •
4. Remove the audio unit (see page 23-71).
5. Connect the test harness (070AZ-SDAA100) to the
radio test harness breakout box (07AAZ-SDAA100).
6. Connect the test harness connector to the printed
circuit board connector of the audio unit.
© © ©
® ® © © j ©
© © © [ © ©
070AZ-SDAA100
A
07AAZ-SDAA100
7. Connect the o h m meter to the breakout box
(07AAZ-SDAA100 adapter) EJECT and GND
terminals.
8. Press the EJECT button and check for continuity
between the EJECT and GND terminals.
Is there continuity?
YES—Replace the audio u n i t . B
NO—Replace the audio-HVAC display panel
(see page 23-71 ) . •
23-41