Honda ACCORD HYBRID 2005 Service Manual page 1541

C o w l C o v e r R e p l a c e m e n t
1. Remove the w i n d s h i e l d w i p e r arms (see page 22-221).
2. Remove the hood rear seal (A) by pulling it out. Using a clip remover, detach the clips (B) f r o m the cowl covers.
Take care not to scratch the cowl covers.
Fastener Locations
B [ > : Clip, 4 C D > : C l i p , 7 D > : C H p , 2 H [ > : C l i p , 1
3. Detach the clips (C, D) by carefully pulling the passenger's cowl cover (E) u p w a r d , and release the hooks (F) on the
passenger's cowl cover f r o m the driver's side, then remove the cover. Take care not to scratch the body.
4. Disconnect the w i n d s h i e l d washer tubes (G).
5. Detach the clips (C, D, H) by carefully pulling the driver's c o w l cover (I) u p w a r d , then remove the cover. Take care
not to scratch the body.
6. Install the covers in the reverse order of r e m o v a l , and note these items:
• Replace any damaged clips.
• Make sure the washer tubes are connected securely.
20-113