Honda ACCORD HYBRID 2005 Service Manual page 1560

Openers
T r u n k L i d L a t c h R e p l a c e m e n t
1. Remove the trunk lid t r i m (see page 20-55).
2. Disconnect the cylinder rod f r o m the lock cylinder
(see page 20-132).
3. Disconnect the trunk lid opener cable (A) and trunk
lid latch switch connector (B). Detach the trunk lid
latch switch connector f r o m the trunk lid. Take care
not to bend the opener cable.
Fastener Locations
4. Remove the bolts f r o m the trunk lid latch (C).
5. Pull the trunk lid latch (A) out, and disconnect the
cylinder rod (B) f r o m the trunk lid latch. Take care
not to bend the cylinder rod.
6. Install the latch in the reverse order of removal, and
note these items:
• Make sure the connector is plugged in properly
and the opener cable is connected properly.
• Make sure the trunk lid opens properly and locks
securely.
T r u n k L i d L o c k C y l i n d e r
R e p l a c e m e n t
1. Remove the trunk lid t r i m (see page 20-55).
2. Disconnect the cylinder rod (A), and disconnect the
cylinder switch connector (B).
3. Remove the bolt securing the lock cylinder (A).
Then turn the trunk lid lock cylinder clockwise, and
remove it.
Fastener Location
• : Bolt, 1
( 1 . 0 k g f m , 7 . 2 Ibf-ft)
4. Install the lock cylinder in the reverse order of
r e m o v a l , and note these items:
• Make sure the cylinder switch connector is
plugged in properly and the cylinder rod is
connected properly.
• Make sure the trunk lid opens properly and locks
securely.
20-132