Honda ACCORD HYBRID 2005 Service Manual page 2249

C-pillar T r i m
During the repair process, inspect these areas:
• Inspect all the SRS w i r e harnesses. Replace, do not
repair, any damaged harnesses.
• Inspect the cable reel for heat damage. If there is any
damage, replace the cable reel.
After the vehicle is completely repaired, t u r n the
ignition switch ON (II). If the SRS indicator comes on for
about 6 seconds and then goes off, the SRS is OK. If the
indicator does not function properly, use the HDS SRS
Menu M e t h o d to read the DTC (see page 24-24). If y o u
cannot retrieve a code, go to SRS S y m p t o m
Troubleshooting, (see page 24-132).
(cont'd)
24-137