Honda ACCORD HYBRID 2005 Service Manual page 2153

8. Read the DTC (see page 24-24).
Is DTC 11-90 or 11-BO indicated?
Y E S — G o t o step 9.
NO—Short to ground in the driver's airbag first or
second inflator; replace the driver's airbag
(see page 2 4 - 1 3 9 ) . •
9. Turn the ignition switch OFF. Disconnect the
battery negative cable, and w a i t for 3 minutes.
10. Disconnect the dashboard wire harness 4P
connector (A) f r o m the cable reel.
11. Connect the SRS inflator simulator (2 Q,
connectors) and the simulator lead to the
dashboard w i r e harness.
12. Reconnect the battery negative cable.
13. Erase the DTC m e m o r y .
14. Read the DTC.
Is DTC 11-90 or 11-BO indicated?
Y E S — G o t o step 15.
NO—Short to ground in the cable reel; replace the
cable reel (see page 24-150). •
15. Turn the ignition switch OFF. Disconnect the
battery negative cable, and w a i t for 3 minutes.
16. Disconnect SRS unit connector A (28P) f r o m the
SRS unit (see step 7 on page 24-23).
17. Disconnect the SRS inflator simulator f r o m the SRS
simulator lead.
18. Check resistance between each terminal of the SRS
simulator lead and body g r o u n d . There should be
an open circuit or at least 1 M Q .
D A S H B O A R D
Is the resistance as specified?
YES—Faulty SRS unit or poor contact at SRS unit
connector A (28P) and the SRS unit. Check the
connection between the connector and the SRS
unit. If the connection is OK, replace the SRS unit
(see page 24-153). •
NO—Short to ground in the dashboard w i r e
harness; replace the dashboard w i r e harness. •
24-41