Honda ACCORD HYBRID 2005 Service Manual page 2023

30. Reconnect the active noise control unit 16P
connector.
3 1 . Perform the Self-diagnostic Procedure (see page
23-19).
32. Press the SCAN button (with navigation) or the
" N o . 1 " button (without navigation).
33. Check for voltage between the active noise control
unit 16P connector No. 12 terminal and body
ground.
ACTIVE NOISE C O N T R O L UNIT 16P C O N N E C T O R
1 r
1 2 3 4 5
/
8
9 10 11 12
/
14 15 16
PNK
W i r e side of female t e r m i n a l s
Is there about 5 V?
Y E S — G o t o step 38.
NO—Go to step 34.
34. Turn the ignition switch OFF.
35. Disconnect the active noise control unit 16P
connector and audio unit connector C (5P).
36. Check for continuity between the active noise
control unit 16P connector No. 12 terminal and
audio unit connector C (5 P) No. 5 t e r m i n a l .
ACTIVE NOISE C O N T R O L UNIT 16P C O N N E C T O R
Wire side of f e m a l e t e r m i n a l s
n
i r
n
1 2 3 4 5
/
7 8
9 10 11 2
/
14 15 16
PNK
s
— ?
PNK
1
2
3
4 5
AUDIO UNIT C O N N E C T O R C (5P)
Wire side of f e m a l e t e r m i n a l s
Is there continuity?
Y E S — G o t o step 37.
NO—Repair an open in the w i r e between the active
noise control unit 16P connector No. 12 terminal
and the audio unit connector C (5P) No. 5
t e r m i n a l . •
(cont'd)
23-57