Honda ACCORD HYBRID 2005 Service Manual page 2088

Navigation System
S y s t e m D i a g n o s t i c M o d e ( c o n t ' d )
D e m o n s t r a t i o n
This screen is for factory use only, and should always
be set to " O F F " . Occasionally this setting is turned
" O N " w h e n vehicles are being used at A u t o S h o w s or
similar events. Turning this feature o n , allows the
navigation system to automatically f o l l o w a route to a
destination w h e n the vehicle is stationary.
f D e m o n s t r a t i o n J 1 Return |
D e m o n s t r a t i o n Model Q N 1 OFF]
I
Set
j
Version
This screen displays the current version of the p r o g r a m ,
and allows the loading of a new version of the p r o g r a m
either f r o m a CD/DVD or f r o m a PC card.
The D-Ram Program version should always be greater
than or equal to the Disc Program version. The mapped
database version is the date of the database on the DVD.
The Model code is 25H, and is for factory use only. This
code is stored on a chip in the navigation unit.
Therefore, every model has a unique part n u m b e r for
the navigation unit.
NOTE: If any model n u m b e r other than 25H is displayed,
replace the navigation unit w i t h the correct part. The
model code tells the navigation unit w h a t software to
load off the DVD.
Do not use DISC LOAD or Card LOAD, unless instructed
to do so by the factory.
(~ V e r s i o n
] | Return |
D-RAM Program x.xxxx
DISC Program x.xxxx
Map DataBase xxxxxxxx
Models xxx
Model Writer
D I S C L O A D | C a r d L O A D
23-122