Honda ACCORD HYBRID 2005 Service Manual page 2209

9. Check resistance between the No. 15 terminal of
SRS unit connector C (16P) and body g r o u n d , and
between the No. 16 terminal and body g r o u n d .
There should be an open circuit or at least 1 M S .
S R S UNIT C O N N E C T O R C (16P)
O
S D A
9 10 11 12 13 14 15 16
Y E L / B L K
I I Y E L
W i r e side of female t e r m i n a l s
Is the resistance as specified?
Y E S — G o t o step 10.
NO—Short to g r o u n d in the side curtain airbag
subharness; replace the side curtain airbag
s u b h a r n e s s . •
10. Reconnect the battery negative cable.
11. Turn the ignition switch ON (II).
12. Check for voltage between the No. 15 terminal of
SRS unit connector C (16P) and body g r o u n d , and
between the No. 16 terminal and body g r o u n d .
There should be 1 V or less.
S R S UNIT C O N N E C T O R C (16P)
9 10 11 12 13 14 15 16
Y E L / B L K I I Y E L
(v) (y)
W i r e side of female t e r m i n a l s
Is the voltage as specified?
Y E S — G o t o step 13.
NO—Short to power in the side curtain airbag
subharness; replace the side curtain airbag
s u b h a r n e s s . •
13. Turn the ignition switch OFF.
14. Connect the SRS inflator simulator (jumper
connector) and simulator lead H to the side curtain
airbag subharness 2P connector (A).
07YAZ-S3AA100
07SAZ-TB4011A
(cont'd)
24-97