Honda ACCORD HYBRID 2005 Service Manual page 2234

SRS
D T C T r o u b l e s h o o t i n g ( c o n t ' d )
2 1 . Disconnect the right floor w i r e harness 4P
connector C801 f r o m the OPDS unit harness.
C801
22. Check resistance between the No. 27 terminal of
SRS unit connector B (28P) and the No. 4 terminal
of right floor w i r e harness 4P connector C801.
There should be 0—1.0 Q.
S R S UNIT C O N N E C T O R B (28P) RIGHT FLOOR WIRE
H A R N E S S 4P
C O N N E C T O R C801
n F~)
I~L
G R N / O R N ^ G R N / O R N
Wire side of f e m a l e t e r m i n a l s
Is the resistance as specified?
YES—Open in the OPDS unit harness; replace the
OPDS unit h a r n e s s . *
NO—Open in the GRN/ORN w i r e of the dashboard
w i r e harness or right floor w i r e harness; replace
the faulty harness. •
23. Disconnect right floor w i r e harness 4P c o n n e c t o r .
C801 f r o m the OPDS unit harness.
C801
24. Check resistance between the No. 27 terminal of
SRS unit connector B (28P) and body g r o u n d . There
should be an open circuit or at least 1 M Q .
S R S UNIT C O N N E C T O R B (28P)
Wire side of f e m a l e t e r m i n a l s
Is the resistance as specified?
YES—Short to g r o u n d in the OPDS unit harness;
replace the OPDS unit harness. •
NO—Short to g r o u n d in the dashboard wire
harness or right floor w i r e harness; replace the
faulty harness. •
24-122