Honda ACCORD HYBRID 2005 Service Manual page 2229

9. Check resistance between the No. 1 terminal of the
right floor w i r e harness 3P connector and body
g r o u n d . There should be 0— 1 Q.
RIGHT FLOOR WIRE H A R N E S S 3P C O N N E C T O R
W i r e side of female t e r m i n a l s
Is the resistance as specified?
YES—Go to step 10.
NO—Open in the right floor wire harness or poor
ground connection at G651 (see page 22-40). If
G651 is OK, replace the right floor w i r e harness. •
10. Disconnect the negative cable f r o m the battery.
11. Disconnect both seat belt tensioner 4P connectors
f r o m the left or right floor w i r e harness (see page
24-23).
12. Disconnect SRS unit connector B (28P) f r o m the
SRS unit (see page 24-23).
13. Check resistance between the No. 2 terminal of the
right floor w i r e harness 3P connector and body
ground. There should be an open circuit or at least
1 M S .
RIGHT FLOOR WIRE H A R N E S S 3P C O N N E C T O R
W i r e side of female t e r m i n a l s
Is the resistance as specified?
YES—Go to step 14.
NO—Short to ground in the left or right floor w i r e
harness; replace the faulty harness. •
14. Check resistance between the No. 3 t e r m i n a l of the
right floor wire harness 3P connector and body
g r o u n d . There should be an open circuit or at least
1 M
Q.
RIGHT FLOOR WIRE H A R N E S S 3P C O N N E C T O R
Wire side of female t e r m i n a l s
Is the resistance as specified?
YES—Replace the SRS unit (see page 24-153). •
NO—Short to g r o u n d in the left or right floor
wire
harness; replace the faulty harness. •
24-117