Figure 9-46. Operations And Maintenance - Comtech EF Data CDM-570A Installation And Operation Manual

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Optional Packet Processor - Serial/Telnet CLI Operation
Selection
Management IP Address
(Redundant Unit)
Management Subnet
Prefix Length (Redundant
Unit)
Force Unit Offline
Redundancy Mode
9.3.10 Operations and Maintenance
Open the Operations and Maintenance page from the Main Menu.
Selection
Unit Uptime
Unit Information
IP Module Boot From
Hot Key Description
[RO] • If standalone CDM-570A/570AL – not used.
• If Online Redundant CDM-570A/570AL – displays Redundant
Management IP Address
• If Offline Redundant CDM-570A/570AL – displays Redundant
Management IP Address
[RO] • If standalone CDM-570A/570AL – not used.
• If Online Redundant CDM-570A/570AL – displays Redundant
Management Subnet
• If Offline Redundant CDM-570A/570AL – displays Redundant
Management Subnet
F
When this active unit is currently the Online unit, select to force a
switchover – i.e., place this unit into Offline (standby) mode.
A Toggle mode as Auto or Manual.

Figure 9-46. Operations and Maintenance

Hot Key Description
Displays – in days, hours, mins, and secs – the lapsed time since the
[RO]
modem and Packet Processor were last rebooted.
I Displays the operating firmware information page.
B
Select which Packet Processor firmware image (includes Application,
FPGA, and FFPGA) is loaded upon bootup:
0 – Latest: Boot the newer firmware image based upon date.
1 – Image1: Boot the firmware image loaded into the first slot in
permanent storage.
2 – Image2: Boot the firmware image loaded into the second slot in
permanent storage.
9–61
MN-CDM570A
Revision 3