Protocol Configuration; Protocol Configuration > Igmp Information - Comtech EF Data CDM-570A Installation And Operation Manual

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Optional Packet Processor - Serial/Telnet CLI Operation
9.3.6

Protocol Configuration

Open the Protocol Configuration Page from the Main Menu.
Selection
IGMP
ARP
DHCP Server IP Address
Brouter Mode
9.3.6.1 Protocol Configuration > IGMP Information
Open the nested IGMP Information page from the Protocol Configuration page.
Use this page to view the IGMP clients that are actively listening to content being provided by
the Packet Processor. It also allows you to determine how the Ethernet Interface is configured
either to receive requests to join IGMP groups or announce groups for others to join.
Selection
IGMP
View IGMP Table
Figure 9-20. Protocol Configuration
Hot Key Description
I
Displays the IGMP page.
A
Displays the ARP Table Utilities page.
R Allows entry of the DHCP server IP address.
Allows hosts on a remote LAN to send DHCP request packets to the DHCP
server so that the DHCP server can dynamically assign IP addresses to
remote hosts.
B Displays the Brouter Configuration page.
Figure 9-21. IGMP Information
Hot Key Description
[RO] Displays IGMP status as [Enabled] or [Disabled].
V This table reports the content that clients have subscribed to the Packet
Processor using the IGMP protocol. This helps determine which services are
being used and the minimum time before a service is terminated.
9–32
MN-CDM570A
Revision 3