Comtech EF Data CDM-570A Installation And Operation Manual page 205

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Ethernet-based Remote Product Management
ARP Table (Edit)
This section displays the current Static and Dynamic ARP entries and, when more than one ARP
entry exists, allows you to directly edit the current Static ARP entries:
Column
Index
IP
MAC
Type
Click [Submit Changes] to save.
Add Static ARP
This section allows you to directly add a static ARP entry. Note that the index number will
automatically increment to the next available number.
Click [Add Entry] to save.
Delete Static ARP
Enter Entry Index to Delete, and then click [Delete Entry]. The entry will then be deleted from
the ARP table.
Flush Dynamic ARPs
Click [Flush ARP Table] to delete all dynamically learned ARP entries.
Make sure to also click [Save PaP Parameters] on the 'Admin | PaP Save' page before
proceeding further.
Description
This is the internal table index that is automatically assigned and cannot be edited.
IP Address, in the format XXX.XXX.XXX.XXX.
MAC Address, in the format YY:YY:YY:YY:YY:YY.
This column identifies the ARP Type as Static or Dynamic. It cannot be edited.
7–33
MN-CDM570A
Revision 3