CDM-570A/570AL Satellite Modem with Optional Packet Processor
Ethernet-based Remote Product Management
7.4.3.4.6.2
Status | Graph | Spectrum
(TOP) Page Example where "PICK A COLOR" = (RED), AVERAGING=High, RESOLUTION=High,
(BOTTOM) Page Example where "PICK A COLOR" = (GREEN), AVERAGING=Low, RESOLUTION=High,
Use this page to display the real-time Spectrum Analyzer. Customize the display as follows:
Feature
"PICK A COLOR"
AVERAGING
RESOLUTION
BAND
Click [START] to activate or [STOP] to pause the Spectrum Analyzer function.
BAND=Wide (Banner, Menu Bar not shown)
Figure 7-41. Status | Graphs | Spectrum Page
Description
Click RED or GREEN to define the
overall appearance of the graph.
Allows you to select the averaging of the
FFT spectrum.
Allows you to adjust the output
resolution.
Allows you to select the bandwidth span. Select Narrow or Wide
BAND=Narrow
Setting
RED waveform on a BLACK/GRAY grid
•
GREEN waveform on a GRAY/BLUE grid
•
Select Off, Low, Medium, or High
Select Low, Medium, or High
7–69
MN-CDM570A
Revision 3
Need help?
Do you have a question about the CDM-570A and is the answer not in the manual?
Questions and answers